TOA

Showing 1–15 of 37 results

A1706 TOA 60 Watt Mixer amplifier

Equipped with 6 Microphone inputs and 5 AUX inputs (simultaneous use of 9 inputs possible), the A-1706 PA amplifier of 60 W is designed to suit the following PA system applications: announcements, BGM, and broadcasting in mosques, churches, large rooms, and factories.

Specifications.

Power Source 220 V – 230 V AC, 50/60 Hz
Rated Output 60 W
Power/Current Consumption 150 W (rated output), 60 W (EN60065), 150 mA or less (when power switch is OFF)
Frequency Response 50 Hz – 20 kHz (±3 dB)
Distortion 2 % or less at 1 kHz, rated power
Input MIC 1 – 6: -60 dB*, 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack

AUX 1 – 2: -20 dB*, 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack

(Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)

AUX 3 – 4: -20 dB*, 10 kΩ, unbalanced, RCA pin jack

AUX 5: -20 dB*, 10 kΩ, unbalanced,

combined type of XLR-3-31 equivalent and phone jack

PWR AMP IN: 0 dB*, 600 Ω, unbalanced, RCA pin jack

(An equalizer or other signal processor connectable between LINE OUT

and PWR AMP IN terminals)

Output REC: 0 dB*, 600 Ω, unbalanced, RCA pin jack

LINE: 0 dB*, 600 Ω, unbalanced, RCA pin jack

SPEAKER SELECTOR: 2 zone, high impedance (100 V line/167 Ω), individual selector key,

M4 screw terminal

DIRECT SPEAKER OUT: High impedance (100 V line/167 Ω), M4 screw terminal

Low impedance (4 – 16 Ω), M4 screw terminal

(Both Low and High impedance terminals cannot be used at the same time.)

Phantom Power ON or OFF for each MIC1 – 6 with switch setting (+17 V DC)
S/N Ratio (Band Pass : 20 Hz – 20 kHz) 100 dB or more (Master volume: min)

76 dB or more (Master volume: max)

60 dB or more (MIC 1 – MIC 4)

53 dB or more (MIC 5, MIC 6)

76 dB or more (AUX 1 – AUX 5)

Tone Control Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control Input REMOTE VOLUME: M3 screw terminal

POWER REMOTE: No-voltage make contact input,

open voltage: 28 V DC (when the unit’s power is OFF),

short-circuit: 10 mA or less, M3 screw terminal

Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED
Operating Temperature -10 ℃ to +40 ℃
Finish Panel: ABS resin, black, hairline

Case: Steel plate, black

Dimensions 420 (W) × 107.7 (H) × 367 (D) mm
Weight 9.3 kg
Accessory Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2
Option Rack mounting bracket: MB-25B

Volume control cover: YA-920

A1712 TOA 120 Watt Mixer amplifier

Equipped with 6 Microphone inputs and 5 AUX inputs (simultaneous use of 9 inputs possible), the A-1712 PA amplifier of 120 W is designed to suit the following PA system applications: announcements, BGM, and broadcasting in mosques, churches, large rooms, and factories.

Specifications.

Power Source 220 – 230 V AC, 50/60 Hz
Rated Output 120 W
Power/Current Consumption 258 W (rated output), 105 W (EN60065), 320 mA or less (when power switch is OFF)
Frequency Response 50 Hz – 20 kHz (±3 dB)
Distortion 2 % or less at 1 kHz, rated power
Input MIC 1 – 6: -60 dB*, 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack

AUX 1 – 2: -20 dB*, 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack

(Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)

AUX 3 – 4: -20 dB*, 10 kΩ, unbalanced, RCA pin jack

AUX 5: -20 dB*, 10 kΩ, unbalanced,

combined type of XLR-3-31 equivalent and phone jack

PWR AMP IN: 0 dB*, 600 Ω, unbalanced, RCA pin jack

(An equalizer or other signal processor connectable between LINE OUT

and PWR AMP IN terminals)

Output REC: 0 dB*, 600 Ω, unbalanced, RCA pin jack

LINE: 0 dB*, 600 Ω, unbalanced, RCA pin jack

SPEAKER SELECTOR: 2 zone, high impedance (100 V line/83 Ω), individual selector key,

M4 screw terminal

DIRECT SPEAKER OUT: High impedance (100 V line/83 Ω), M4 screw terminal

Low impedance (4 – 16 Ω), M4 screw terminal

(Both Low and High impedance terminals cannot be used at the same time.)

Phantom Power ON or OFF for each MIC1 – 6 with switch setting (+17 V DC)
S/N Ratio (Band Pass : 20 Hz – 20 kHz) 100 dB or more (Master volume: min)

76 dB or more (Master volume: max)

60 dB or more (MIC 1 – MIC 4)

53 dB or more (MIC 5, MIC 6)

76 dB or more (AUX 1 – AUX 5)

Tone Control Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control Input REMOTE VOLUME: M3 screw terminal

POWER REMOTE: No-voltage make contact input,

open voltage: 28 V DC (when the unit’s power is OFF),

short-circuit: 10 mA or less, M3 screw terminal

Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED
Operating Temperature -10 ℃ to +40 ℃
Finish Panel: ABS resin, black, hairline

Case: Steel plate, black

Dimensions 420 (W) × 107.7 (H) × 367 (D) mm
Weight 12.6 kg
Accessory Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2
Option Rack mounting bracket: MB-25B

Volume control cover: YA-920

 

A1724 TOA 240 Watt Mixer amplifier

Equipped with 6 Microphone inputs and 5 AUX inputs (simultaneous use of 9 inputs possible), the A-1724 PA amplifier of 240 W is designed to suit the following PA system applications: announcements, BGM, and broadcasting in mosques, churches, large rooms, and factories.

Power Source 220 – 230 V AC, 50/60 Hz
Rated Output 240 W
Power/Current Consumption 532 W (rated output), 220 W (EN60065), 60 mA or less (when power switch is OFF)
Frequency Response 50 Hz – 20 kHz (±3 dB)
Distortion 2 % or less at 1 kHz, rated power
Input MIC 1 – 6: -60 dB*, 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack

AUX 1 – 2: -20 dB*, 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack

(Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)

AUX 3 – 4: -20 dB*, 10 kΩ, unbalanced, RCA pin jack

AUX 5: -20 dB*, 10 kΩ, unbalanced,

combined type of XLR-3-31 equivalent and phone jack

PWR AMP IN: 0 dB*, 600 Ω, unbalanced, RCA pin jack

(An equalizer or other signal processor connectable between LINE OUT

and PWR AMP IN terminals)

Output REC: 0 dB*, 600 Ω, unbalanced, RCA pin jack

LINE: 0 dB*, 600 Ω, unbalanced, RCA pin jack

SPEAKER SELECTOR: 2 zone, high impedance (100 V line/42 Ω), individual selector key,

M4 screw terminal

DIRECT SPEAKER OUT: High impedance (100 V line/42 Ω), M4 screw terminal

Low impedance (4 – 16 Ω), M4 screw terminal

(Both Low and High impedance terminals cannot be used at the same time.)

Phantom Power ON or OFF for each MIC1 – 6 with switch setting (+17 V DC)
S/N Ratio (Band Pass : 20 Hz – 20 kHz) 100 dB or more (Master volume: min)

76 dB or more (Master volume: max)

60 dB or more (MIC 1 – MIC 4)

53 dB or more (MIC 5, MIC 6)

76 dB or more (AUX 1 – AUX 5)

Tone Control Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control Input REMOTE VOLUME: M3 screw terminal

POWER REMOTE: No-voltage make contact input,

open voltage: 28 V DC (when the unit’s power is OFF),

short-circuit: 10 mA or less, M3 screw terminal

Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED
Operating Temperature -10 ℃ to +40 ℃
Finish Panel: ABS resin, black, hairline

Case: Steel plate, black

Dimensions 420 (W) × 107.7 (H) × 367 (D) mm
Weight 13.5 kg
Accessory Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2
Option Rack mounting bracket: MB-25B

Volume control cover: YA-920

 

A1803 TOA 30 Watt Mixer amplifier

Equipped with Priority function, Chime function, and 2 Zone selector switches, the A-1803 PA Amplifier of 30 W is designed to suit the following PA system applications: paging announcements, intercommunication’s, BGM, and broadcasting in schools, offices, and shops. It’s power remote control function, provided especially for use in conjunction with the P-1812 (optional), will turn ON or OFF the P-1812’s power.

Specifications.

Power Source 220 V – 230 V AC, 50/60 Hz

24 V DC (M4 screw terminal)

Rated Output 30 W
Power/Current Consumption AC operation: 80 W (rated output), 37 W (EN60065),

24 V DC operation: 2.0 A (rated output), 1.0 A (EN60065)

Frequency Response 50 Hz – 20 kHz (±3 dB)
Distortion 2 % or less at 1 kHz, rated power
Input MIC 1: -60 dB(*1), 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack, DIN socket (5 pins)

MIC 2 – 3: -60 dB(*1), 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack

AUX 1 (MOH): -20 dB(*1), 10 kΩ, unbalanced, RCA pin jack

AUX 2: -20 dB(*1), 10 kΩ, unbalanced, RCA pin jack

AUX 3: -20 dB(*1), 10 kΩ, unbalanced, combined type of XLR-3-31 and phone jack

TEL(*2): -20 dB(*1), 10 kΩ, electronically-balanced, M3 screw terminal

EMERGENCY: 0 dB(*1), 600 Ω, unbalanced, M3 screw terminal

Output REC: 0 dB(*1), 600 Ω, unbalanced, RCA pin jack

LINE 1, 2 (*3): 0 dB(*1), 600 Ω, unbalanced, RCA pin jack

MOH: 0 dB(*1), 600 Ω, transformer balanced, M3 screw terminal

SPEAKER SELECTOR: 2 zone, high impedance (100 V line/330 Ω), individual selector switch,

M4 screw terminal

DIRECT SPEAKER OUT: High impedance (100 V line/330 Ω), M4 screw terminal

Low impedance (4 – 16 Ω), M4 screw terminal

(Both Low and High impedance terminals cannot be used at the same time.)

Phantom Power ON or OFF for each MIC1 – 3 with switch setting (+17 V DC)
S/N Ratio (Band Pass : 20 Hz – 20 kHz) 100 dB or more (Master volume: min)

76 dB or more (Master volume: max)

60 dB or more (MIC 1 – MIC 3)

76 dB or more (AUX 1 – AUX 3)

90 dB or more (TEL)

96 dB or more (EMERGENCY)

Tone Control Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control Input TEL: No-voltage make contact input, open voltage: 24 V DC, short-circuit: 5 mA or less,

M3 screw terminal

EMERGENCY(*4): No-voltage make contact input, open voltage: 24 V DC,

short-circuit: 10 mA or less, M3 screw terminal

Control Output Power remote: Open collector output, withstand voltage: 35 V DC,

control current: 50 mA or less, M3 screw terminal

Chime 1-tone, 2-tone, or ascending 4-tone chime, or None selectable with switch setting,

activated at MIC 1’s DIN or CONTROL TEL terminal.

Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED, Emergency LED,

TEL LED

Priority EMERGENCY: Overrides other inputs

TEL: Overrides other inputs except ‘EMERGENCY’, ON/OFF selectable with switch setting

MIC 1: Overrides other inputs except ‘EMERGENCY & TEL’,

ON/OFF selectable with switch setting

Operating Temperature -10 ℃ to +40 ℃
Finish Panel: ABS resin, black, hairline

Case: Steel plate, black

Dimensions 420 (W) × 107.7 (H) × 367 (D) mm
Weight 8.1 kg
Accessory Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2
Option Rack mounting bracket: MB-25B

Volume control cover: YA-920

Input transformer: IT-453A

A1806 TOA 60 Watt Mixer Amplifier

TOA’s A-1806 features: 60W output (100V or low impedance), 3 mic and 3 aux inputs, built in chimes, priority function, emergency input and telephone paging.

Specifications.

Power Source 220 V – 230 V AC, 50/60 Hz

24 V DC (M4 screw terminal)

Rated Output 60 W
Power/Current Consumption AC operation: 158 W (rated output), 66 W (EN60065),

24 V DC operation: 3.8 A (rated output), 1.6 A (EN60065)

Frequency Response 50 Hz – 20 kHz (±3 dB)
Distortion 2 % or less at 1 kHz, rated power
Input MIC 1: -60 dB(*1), 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack, DIN socket (5 pins)

MIC 2 – 3: -60 dB(*1), 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack

AUX 1 (MOH): -20 dB(*1), 10 kΩ, unbalanced, RCA pin jack

AUX 2: -20 dB(*1), 10 kΩ, unbalanced, RCA pin jack

AUX 3: -20 dB(*1), 10 kΩ, unbalanced, combined type of XLR-3-31 and phone jack

TEL(*2): -20 dB(*1), 10 kΩ, electronically-balanced, M3 screw terminal

EMERGENCY: 0 dB(*1), 600 Ω, unbalanced, M3 screw terminal

Output REC: 0 dB(*1), 600 Ω, unbalanced, RCA pin jack

LINE 1, 2 (*3): 0 dB(*1), 600 Ω, unbalanced, RCA pin jack

MOH: 0 dB(*1), 600 Ω, transformer balanced, M3 screw terminal

SPEAKER SELECTOR: 2 zone, high impedance (100 V line/167 Ω), individual selector switch,

M4 screw terminal

DIRECT SPEAKER OUT: High impedance (100 V line/167 Ω), M4 screw terminal

Low impedance (4 – 16 Ω), M4 screw terminal

(Both Low and High impedance terminals cannot be used at the same time.)

Phantom Power ON or OFF for each MIC1 – 3 with switch setting (+17 V DC)
S/N Ratio (Band Pass : 20 Hz – 20 kHz) 100 dB or more (Master volume: min)

76 dB or more (Master volume: max)

60 dB or more (MIC 1 – MIC 3)

76 dB or more (AUX 1 – AUX 3)

90 dB or more (TEL)

96 dB or more (EMERGENCY)

Tone Control Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control Input TEL: No-voltage make contact input, open voltage: 24 V DC, short-circuit: 5 mA or less,

M3 screw terminal

EMERGENCY(*4): No-voltage make contact input, open voltage: 24 V DC,

short-circuit: 10 mA or less, M3 screw terminal

Control Output Power remote: Open collector output, withstand voltage: 35 V DC,

control current: 50 mA or less, M3 screw terminal

Chime 1-tone, 2-tone, or ascending 4-tone chime, or None selectable with switch setting,

activated at MIC 1’s DIN or CONTROL TEL terminal.

Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED, Emergency LED,

TEL LED

Priority EMERGENCY: Overrides other inputs

TEL: Overrides other inputs except ‘EMERGENCY’, ON/OFF selectable with switch setting

MIC 1: Overrides other inputs except ‘EMERGENCY & TEL’,

ON/OFF selectable with switch setting

Operating Temperature -10 ℃ to +40 ℃
Finish Panel: ABS resin, black, hairline

Case: Steel plate, black

Dimensions 420 (W) × 107.7 (H) × 367 (D) mm
Weight 9.4 kg
Accessory Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2
Option Rack mounting bracket: MB-25B

Volume control cover: YA-920

Input transformer: IT-453A

 

A1812 TOA 120 Watt – Mixer amplifier

TOA’s A-1812 features: 120W output (100V or low impedance), 3 mic and 3 aux inputs, built in chimes, priority function, emergency input and telephone paging.

Specifications.

Power Source 220 V – 230 V AC, 50/60 Hz

24 V DC (M4 screw terminal)

Rated Output 120 W
Power/Current Consumption AC operation: 258 W (rated output), 94 W (EN60065)

under 320 mA (when power switch is OFF)

24 V DC operation: 7.0 A (rated output), 2.7 A (EN60065)

Frequency Response 50 – 20,000 Hz (±3 dB)
Distortion Under 2% at 1 kHz, rated power
Input LINE: 0 dB(*1)/-10 dB(*1) (switchable), 10 kΩ, transformer balanced, RCA pin jack
Output LINE: 0 dB(*1), 600 Ω, unbalanced, RCA pin jack

SPEAKER: High impedance (100 V line/83 Ω), M4 screw terminal

Low impedance (4 – 16 Ω), M4 screw terminal

(Both Low and High impedance terminals cannot be used at the same time.)

S/N Ratio (Band Pass : 20 – 20,000 Hz) Over 100 dB (Master volume: min)

Over 97 dB (Master volume: max, INPUT LEVEL switch: 0 dB)

Over 90 dB (Master volume: max, INPUT LEVEL switch: -10 dB)

Control Input POWER REMOTE: No-voltage make contact input, open voltage: 24 V DC,

short-circuit: under 1 mA, M3 screw terminal

EMERGENCY(*2): No-voltage make contact input, open voltage: 24 V DC,

short-circuit: under 1 mA, M3 screw terminal

Indicator 5 point LED output level meter, Power indicator LED
Operating Temperature -10℃ to +40℃
Finish Panel: ABS resin, black, hair line

Case: Steel plate, black

Dimensions 420 (W) × 107.7 (H) × 367 (D) mm
Weight 12.2 kg
Accessory Power cord …1, Terminal block cover …1, Terminal block cover mounting screw …2
Option Rack mounting bracket: MB-25B

Volume control cover: YA-920

A2030 TOA 30 Watt Mixer amplifier

The A-2030 is a high cost-performance mixer power amplifier suited for broadcasting paging or background music in schools, offices, shops, factories, mosques, churches and large rooms.

Specifications.

Power Source 220 – 240 V AC, or 24 V DC
Rated Output 30 W
Power Consumption 34 W (EN60065), 2 A (DC operation at rated output)
Frequency Response 50 – 20,000 Hz (±3 dB)
Distortion 1% or less at 1 kHz, 1/3 rated power
Input MIC 1: -60 dB*, 600 Ω, balanced, DIN type (5 pins)

MIC 2, 3: -60 dB*, 600 Ω, balanced, phone jack

AUX 1, 2: -20 dB*, 10 kΩ, unbalanced, RCA pin jack

Mute: Contact pin 4 – 5 closure input (for MIC 1)

Output Speaker out: Balanced (floating), M3.5 screw terminal,

distance between barriers: 8.3 mm (0.33″)

High impedance: 330 Ω (100 V), 170 Ω (70 V)

Low impedance: 4 Ω (11 V)

Rec out: 0 dB*, 600 Ω, unbalanced, RCA pin jack

Phantom Power DC +21 V (MIC 1)
S/N Ratio 60 dB or more
Tone Control Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz

Muting MIC 1 overrides other input signals with 0 – 30 dB attenuation by mute terminal

contact in MIC 1 DIN type connector.

Finish Panel: ABS resin, black

Case: Steel plate, black

Dimensions 420 (W) × 100.9 (H) × 280.3 (D) mm (16.54″ × 3.97″ × 11.04″)
Weight 5 kg (11.05 lb)

 

A2060 TOA 60 Watt Mixer amplifier

TOA’s A2000 Series Mixer and Power Amplifiers are designed to be highly cost effective solutions to the demands of PA applications. They offer high levels of performance and versatility and are well-suited for paging and background music in schools, offices, shops, warehouses, factories, houses of worship and large meeting rooms.

Specifications.

Power Source 220 – 240 V AC, or 24 V DC
Rated Output 60 W
Power Consumption 72 W (EN60065), 4 A (DC operation at rated output)
Frequency Response 50 – 20,000 Hz (±3 dB)
Distortion 1% or less at 1 kHz, 1/3 rated power
Input MIC 1 – 3: -60 dB*, 600 Ω, balanced, equivalent to XLR-3-31 type

AUX 1, 2: -20 dB*, 10 kΩ, unbalanced, RCA pin jack

Mute: Contact screw terminal (for MIC 1)

Output Speaker out: Balanced (floating), M3.5 screw terminal,

distance between barriers: 8.3 mm (0.33″)

High impedance: 170 Ω (100 V), 83 Ω (70 V)

Low impedance: 4 Ω (15.5 V)

Rec out: 0 dB*, 600 Ω, unbalanced, RCA pin jack

Phantom Power DC +21 V (MIC 1)
S/N Ratio 60 dB or more
Tone Control Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz

Muting MIC 1 overrides other input signals with 0 – 30 dB attenuation by mute terminal

contact.

Finish Panel: ABS resin, black

Case: Steel plate, black

Dimensions 420 (W) × 100.9 (H) × 280.3 (D) mm (16.54″ × 3.97″ × 11.04″)
Weight 7 kg (15.43 lb)

 

A2120 TOA 120 Watt Mixer amplifier

TOA’s A2000 Series Mixer and Power Amplifiers are designed to be highly cost effective solutions to the demands of PA applications. They offer high levels of performance and versatility and are well-suited for paging and background music in schools, offices, shops, warehouses, factories, houses of worship and large meeting rooms.

Specifications

Power Source 220 – 240 V AC, or 24 V DC
Rated Output 120 W
Power Consumption 124 W (EN60065), 8 A (DC operation at rated output)
Frequency Response 50 – 20,000 Hz (±3 dB)
Distortion 1% or less at 1 kHz, 1/3 rated power
Input MIC 1 – 3: -60 dB*, 600 Ω, balanced, equivalent to XLR-3-31 type

AUX 1, 2: -20 dB*, 10 kΩ, unbalanced, RCA pin jack

Mute: Contact screw terminal (for MIC 1)

Output Speaker out: Balanced (floating), M3.5 screw terminal,

distance between barriers: 8.3 mm (0.33″)

High impedance: 83 Ω (100 V), 42 Ω (70 V)

Low impedance: 4 Ω (22 V)

Rec out: 0 dB*, 600 Ω, unbalanced, RCA pin jack

Phantom Power DC +21 V (MIC 1)
S/N Ratio 60 dB or more
Tone Control Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz

Muting MIC 1 overrides other input signals with 0 – 30 dB attenuation by mute terminal

contact.

Finish Panel: ABS resin, black

Case: Steel plate, black

Dimensions 420 (W) × 100.9 (H) × 360.3 (D) mm (16.54″ × 3.97″ × 14.19″)
Weight 10.8 kg (23.81 lb)

 

A2240 TOA 240 Watt Mixer amplifier

TOA’s A2000 Series Mixer and Power Amplifiers are designed to be highly cost effective solutions to the demands of PA applications. They offer high levels of performance and versatility and are well-suited for paging and background music in schools, offices, shops, warehouses, factories, houses of worship and large meeting rooms.

Specifications.

Power Source 220 – 240 V AC, or 24 V DC
Rated Output 240 W
Power Consumption 238 W (EN60065), 15 A (DC operation at rated output)
Frequency Response 50 – 20,000 Hz (±3 dB)
Distortion 1% or less at 1 kHz, 1/3 rated power
Input MIC 1 – 3: -60 dB*, 600 Ω, balanced, equivalent to XLR-3-31 type

AUX 1, 2: -20 dB*, 10 kΩ, unbalanced, RCA pin jack

Mute: Contact screw terminal (for MIC 1)

Output Speaker out: Balanced (floating), M3.5 screw terminal,

distance between barriers: 8.3 mm (0.33″)

High impedance: 42 Ω (100 V), 21 Ω (70 V)

Low impedance: 4 Ω (31 V)

Rec out: 0 dB*, 600 Ω, unbalanced, RCA pin jack

Phantom Power DC +21 V (MIC 1)
S/N Ratio 60 dB or more
Tone Control Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz

Muting MIC 1 overrides other input signals with 0 – 30 dB attenuation by mute terminal

contact.

Ventilation Fan cooling
Finish Panel: ABS resin, black

Case: Steel plate, black

Dimensions 420 (W) × 100.9 (H) × 360.3 (D) mm (16.54″ × 3.97″ × 14.19″)
Weight 13.2 kg (29.1 lb)

CA115 TOA 15 Watt 12Volt Car Amplifier

The CA-130 is a 1-DIN size unit 30 W car amplifier designed for use with a 12 V car battery.

Includes Microphone.

Specifications.

Power Source Standard voltage: 14 V DC

Usable voltage: 10 – 16 V DC (12 V battery used)

Power Consumption 5 A or less at rated output
Rated Output 30 W
Output Impedance 4 Ω (BRN), 8 Ω (ORG), Common (WHT)

Changeable by changing lead wire connections

Distortion Less than 5% (at 1,000 Hz rated output)
Frequency Response 100 – 10,000 Hz
Input Mic1, 2: 600 Ω, 4 mV, phone jack

Aux : 10 kΩ, 500 mV, phone jack

Finish Front panel: ABS resin, black

Case : Zinc plated steel sheet

Dimensions 178 (W) × 50 (H) × 144 (D) mm (Mounting device excluded)
Weight 1.1 kg
Accessory Microphone holder …… 1, Mounting bracket …… 1, Mounting screw …… 1set,

Fuse (8 A) …… 1, Connection cord …… 1set

Accessory Microphone Unidirectional dynamic type with talk switch

Impedance: 600 Ω

Sensitivity : -53 dB (1 kHz, 0 dB = 1 V/Pa)

 

CA130 TOA 30 Watt 12Volt car amplifier

The CA-130 is a 1-DIN size unit 30 W car amplifier designed for use with a 12 V car battery.

Includes Microphone.

Specifications.

Power Source Standard voltage: 14 V DC

Usable voltage: 10 – 16 V DC (12 V battery used)

Power Consumption 5 A or less at rated output
Rated Output 30 W
Output Impedance 4 Ω (BRN), 8 Ω (ORG), Common (WHT)

Changeable by changing lead wire connections

Distortion Less than 5% (at 1,000 Hz rated output)
Frequency Response 100 – 10,000 Hz
Input Mic1, 2: 600 Ω, 4 mV, phone jack

Aux : 10 kΩ, 500 mV, phone jack

Finish Front panel: ABS resin, black

Case : Zinc plated steel sheet

Dimensions 178 (W) × 50 (H) × 144 (D) mm (Mounting device excluded)
Weight 1.1 kg
Accessory Microphone holder …… 1, Mounting bracket …… 1, Mounting screw …… 1set,

Fuse (8 A) …… 1, Connection cord …… 1set

Accessory Microphone Unidirectional dynamic type with talk switch

Impedance: 600 Ω

Sensitivity : -53 dB (1 kHz, 0 dB = 1 V/Pa)

 

CA160 TOA 60 Watt 12Volt Car Amplifier

The CA-160 is a 1-DIN size unit 60 W car amplifier designed for use with a 12 V car battery.

Includes Microphone.

Specifications

Power Source Standard voltage: 14 V DC

Usable voltage: 10 – 16 V DC (12 V battery used)

Power Consumption 9 A or less at rated output
Rated Output 60 W
Output Impedance 4 Ω (BRN), 8 Ω (ORG), Common (WHT)

Changeable by changing lead wire connections

Distortion Less than 5% (at 1,000 Hz rated output)
Frequency Response 100 – 10,000 Hz
Input Mic1, 2: 600 Ω, 4 mV, phone jack

Aux : 10 kΩ, 500 mV, phone jack

Finish Front panel: ABS resin, black

Case : Zinc plated steel sheet

Dimensions 178 (W) × 50 (H) × 170 (D) mm (Mounting device excluded)
Weight 1.2 kg
Accessory Microphone holder …… 1, Mounting bracket …… 1, Mounting screw …… 1set,

Fuse (12 A) …… 1, Connection cord …… 1set

Accessory Microphone Unidirectional dynamic type with talk switch

Impedance: 600 Ω

Sensitivity : -53 dB (1 kHz, 0 dB = 1 V/Pa)

 

DA250DH TOA Power Amplifier – 100V Line

DA250DH 2 x 250 Watts into 100 Volt Line.

  • First input link-able to all outputs.
  • Accepts balanced XLR or Phoenix (bare wire) connectors.
  • All inputs suitable for balanced or unbalanced connections.
  • Class D amplifier – 85% Efficiency. Produces? stable, very low heat dissipation for extended periods at full power.
  • Weight – 5.3Kg.
  • Height – 1 rack unit.

Specifications.

Power Source 220 – 240 V AC
Amplification System Class D
Power Consumption 120 W (based on EN standards)

580 W (rated output 100 V line

Input 2 circuits

10 k??

XLR-3-31 type connector

CH 1 mode ON/OFF switch (ON: PARALLEL

Rated Output 2 channels: 250 W ?? 2 (100 V line

M4 screw terminal

Frequency Response 50 Hz – 20 kHz (-3 dB
Total Harmonic Distortion 0.1 % (1 kHz)

0.3 % (100 Hz – 20 kHz)

Protection Circuit Protection against excessive current flow due to overload

short circuit

temperature rise at power amp. heat sink (100 ??? (212 ???F) or more)

temperature rise inside the unit (80 ??? (176 ???F) or more)

S/N Ratio 100 dB (A-weighted)
Crosstalk 70 dB (A-weighted)
LED Indicator Power (blue) ?? 1

Protect (red) ?? 2

Cooling Forced air cooling
Operating Temperature -10 ??? to +40 ??? (14 ???F to 104 ???F)
Operating Humidity 90 %RH or less (no condensation)
Finish Panel: Aluminum

Case: Plated steel sheet

Dimensions 482 (W) ?? 44 (H) ?? 401.8 (D) mm (18.98 ?? 1.73″ ?? 15.82)
Weight 5.3 kg (11.68 lb)
Accessory Power cord (2 m (6.56 ft)) ???1

Tamper-proof cap ???2

Option Matching transformer: MT-251H

 

DA250FH TOA Power Amplifier – 100V Line

DA250FH 4 x 250 Watts into 100 Volt Line

  • First input link-able to all outputs.
  • All inputs suitable for Balanced or Unbalanced connections.
  • Class D amplifier – 85% efficiency, very low heat dissipation for extended periods at full power.
  • Weight – 6.8Kg.
  • Height – 1 rack unit.

Specifications.

Power Source 220 – 240 V AC
Amplification System Class D
Power Consumption 200 W (based on EN standards)

1150 W (rated output 100 V line

Input 4 circuits

10 kΩ

CH 1 mode ON/OFF switch (ON: CH 1 to All ch

Rated Output 4 channels: 250 W × 4 (100 V line

M4 screw terminal

Frequency Response 50 Hz – 20 kHz (-3 dB
Total Harmonic Distortion 0.1 % (1 kHz)

0.3 % (100 Hz – 20 kHz)

Protection Circuit Protection against excessive current flow due to overload

short circuit

temperature rise at power amp. heat sink (110 ℃ (230 ゜F) or more)

temperature rise inside the unit (80 ℃ (176 ゜F) or more)

S/N Ratio 100 dB (A-weighted)
Crosstalk 70 dB (A-weighted)
LED Indicator Power (blue) × 1

Peak (red) × 4

Cooling Forced air cooling
Operating Temperature -10 ℃ to +40 ℃ (14 ゜F to 104 ゜F)
Operating Humidity 90 %RH or less (no condensation)
Finish Panel: Aluminum

Case: Plated steel sheet

Dimensions 482 (W) × 44 (H) × 401.8 (D) mm (18.98 × 1.73″ × 15.82)
Weight 6.8 kg (14.99 lb)
Accessory Power cord (2 m (6.56 ft)) …1

Tamper-proof cap …4

Option Matching transformer: MT-251H