A1712 TOA 120 Watt Mixer amplifier

Equipped with 6 Microphone inputs and 5 AUX inputs (simultaneous use of 9 inputs possible), the A-1712 PA amplifier of 120 W is designed to suit the following PA system applications: announcements, BGM, and broadcasting in mosques, churches, large rooms, and factories.

Specifications.

Power Source 220 – 230 V AC, 50/60 Hz
Rated Output 120 W
Power/Current Consumption 258 W (rated output), 105 W (EN60065), 320 mA or less (when power switch is OFF)
Frequency Response 50 Hz – 20 kHz (±3 dB)
Distortion 2 % or less at 1 kHz, rated power
Input MIC 1 – 6: -60 dB*, 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack

AUX 1 – 2: -20 dB*, 600 Ω, electronically-balanced,

combined type of XLR-3-31 equivalent and phone jack

(Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)

AUX 3 – 4: -20 dB*, 10 kΩ, unbalanced, RCA pin jack

AUX 5: -20 dB*, 10 kΩ, unbalanced,

combined type of XLR-3-31 equivalent and phone jack

PWR AMP IN: 0 dB*, 600 Ω, unbalanced, RCA pin jack

(An equalizer or other signal processor connectable between LINE OUT

and PWR AMP IN terminals)

Output REC: 0 dB*, 600 Ω, unbalanced, RCA pin jack

LINE: 0 dB*, 600 Ω, unbalanced, RCA pin jack

SPEAKER SELECTOR: 2 zone, high impedance (100 V line/83 Ω), individual selector key,

M4 screw terminal

DIRECT SPEAKER OUT: High impedance (100 V line/83 Ω), M4 screw terminal

Low impedance (4 – 16 Ω), M4 screw terminal

(Both Low and High impedance terminals cannot be used at the same time.)

Phantom Power ON or OFF for each MIC1 – 6 with switch setting ( 17 V DC)
S/N Ratio (Band Pass : 20 Hz – 20 kHz) 100 dB or more (Master volume: min)

76 dB or more (Master volume: max)

60 dB or more (MIC 1 – MIC 4)

53 dB or more (MIC 5, MIC 6)

76 dB or more (AUX 1 – AUX 5)

Tone Control Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control Input REMOTE VOLUME: M3 screw terminal

POWER REMOTE: No-voltage make contact input,

open voltage: 28 V DC (when the unit’s power is OFF),

short-circuit: 10 mA or less, M3 screw terminal

Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED
Operating Temperature -10 ℃ to 40 ℃
Finish Panel: ABS resin, black, hairline

Case: Steel plate, black

Dimensions 420 (W) × 107.7 (H) × 367 (D) mm
Weight 12.6 kg
Accessory Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2
Option Rack mounting bracket: MB-25B

Volume control cover: YA-920

 

SKU: A1712 Brand:
Share this product